AOI | AOI machine | AOI manufacturer | AOI factory from China
Menu

Working Conditions of EKT AOI System

Home » News

To avoid external factors affecting the normal use of EKT AOI system, please follow the following items:

1. Operating environment of this equipment:

The environment temperature of the equipment is: 10℃ to 35℃; the relative humidity is:35% to 80%.

The equipment shall be placed in a place free from direct sunlight, dew and splashing of chemical liquids such as water and oil.

2. When the equipment is in normal use, please reserve a certain space in front of and behind the equipment so as to facilitate the maintenance of the equipment and the emission of internal heat. Do not cover the equipment with cover

during its normal operation, so as not to affect the heat emission.

3. Please keep the equipment in the following places when the equipment is not used:

Environment temperature: 0℃ to 40℃; relative humidity: 35% to 80%

The equipment shall be placed in a place free from direct sunlight, dew and splashing of chemical liquids such as water and oil.

To prevent dust, the equipment may be covered.

4. Impact or strong vibration should be avoided. Otherwise, the failure of equipment may be caused.

5. When cutting off the power supply of the equipment, please perform the system exit/shutdown process in the following order. If the power supply is directly cut off or restarted without performing this process, the data will not be kept intact and the hard disk may also be damaged.

The correct exit procedure is as follows:

Exit application program → Exit Windows → Cut off power supply

6. When the equipment is running, do not open the safety door of the equipment to avoid accidents.

7. Repeated ON /OFF of the power supply will cause the failure of the main machine. After the power supply is OFF, please restart the power supply after 20 seconds.

8. To prevent the PCB or equipment to be inspected from being damaged, please use the substrate of inspection object conforming to the specifications and dimensions of the equipment. It is necessary to note that the height requirements of the equipment for the parts of PCB are as follows:

PCB inspection surface

9. Height of front part ≤ 30 mm Height of back part of PCB inspection surface ≤50mm

 

Home About UsProductsNewsServiceContact UsCase RSS
CoryRight © All Rights Reserved.