AOI | AOI machine | AOI manufacturer | AOI factory from China
Home » Products » Solder Dross Recovery System » Automatic Solder Recovery System
Automatic Solder Recovery System

Automatic Solder Recovery System

Product Description:

  • The Solder Recovery System enables PCB manufacturers to recycle solder onsite directly from their wave solder machines.
  • EKT-SRS solder recovery system is designed to extract and purify solder from solder dross to reuse in wave soldering process so as to achieve cost reduction and environment conservation.
  • The solder recovery rate is around 75%~90% depends on dross composition.
  • EKT-SRS solder recovery (recycling) system owns National Utility Model patent.

Features of EKT solder recovery system:

  • Easy operation, high efficiency and directly reclaim pure solder from wave solder machine;
  • Uses no chemicals, radiation, additives or other toxic substances, separate pure solder with residual dross to respective containers continually and automatically;
  • Lead-free, environment friendly;
  • Operates with an integral filtration system– filtering smells and fumes;
  • Tested by China Electronic Lab that the composition of recovered solder is exactly the same as the solder in your solder pot;
  • Met SGS environmental requirement test ROHS regulation;
  • Adopt microcomputer with PLC control, performance stable and reliable;
  • Friendy and convenient interface for operator, user can switch English and Chinese freely.

Structure of device:
  • Outside feeding system: convenient for operation and keep machine clean inside;
  • Centrifugal filler mixing system: ensure continuous and homogeneous filling of solder mixture.
  • Inner cooling system: fast cooling for recovered solder, reduce oxidation and improve efficiency;
  • Residual dross bin: fast cooling, reduce heat transmission and fume pollution;
  • Sealed separating system: with imported antiseptic titanium alloy and stainless steel NO.316, ensure reliable life cycle and quality.
  • Collection of pure solder: automatically collect recovered solder into molding slot under control of electro-optic sensor and brake motor.

Specifications EKT-SRS-03

Feeder system




Room temp~350℃

Temp control mode


Warm-up time

5 min

Solder residue capacity


Mixing motor


Timing mode

Gear timing

Centrifugal mixing rev

15 Rev/min

Slope angle


Separate system



Warm-up time

8 min



Melt time

around 30 min

Separate motor


Timing mode

Steady speed


5~15 Rev/min

Slope angle



Sieve separation

Figuration system

Inner figuration system

Figuration bath quantity


Control mode

Electro-optic control


Inner forced cooling system




Start up power

13 KW

Normal working power

≦6 KW

Power requirements

3 Phase/380VAC/50~60Hz


Approx: 380kg

Cooler temp

Room temp

Home About UsProductsNewsServiceContact UsCase RSS
CoryRight © All Rights Reserved.